Slow upload speeds - DFW area?

Wanted to see if others were having issues with slow upload speeds. For last 2-4 weeks, I've been having really slow upload speeds and wanted to see if others were having issues. I've powercycled my router, plugged directly into the router, and neither worked.

I've used mulitple speed test sites(testmy.net, speedtest.net, and Verizon's my.verizon.com/services/speedtest).  All of them come back with uploads of 0.2 - 1Mb.  I've ran the Network Diganostic test and it shows slow uploads there too. I'm on the 30/30 plan. Nearest server to my location appears 

Verizon's speed test:

From their Network Diagnostic toolI've removed IPs)

Analysis information:

WEB100 Enabled Statistics:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
checking for firewalls . . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client-to-server [C2S]) . . . . . 7.10Mb/s
running 10s inbound test (server-to-client [S2C]) . . . . . . 29.35Mb/s

------ Client System Details ------
OS data: Name = Windows 7, Architecture = x86, Version = 6.1
Java data: Vendor = Oracle Corporation, Version = 1.8.0_60

------ Web100 Detailed Analysis ------
45 Mbps T3/DS3 link found.
Link set to Full Duplex mode
No network congestion discovered.
Good network cable(s) found
Normal duplex operation found.

Web100 reports the Round trip time = 44.45 msec; the Packet size = 1452 Bytes; and
There were 81 packets retransmitted, 257 duplicate acks received, and 325 SACK blocks received
The connection was idle 0 seconds (0%) of the time
S2C throughput test: Packet queuing detected: 39.44%
This connection is receiver limited 33.01% of the time.
This connection is sender limited 63.81% of the time.
This connection is network limited 3.18% of the time.

Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: ON
Current Send Buffer 8 Kbyte
Current Receive Buffer 8 Kbyte
Display Name = Microsoft ISATAP Adapter MTU = 1280
Display Name = Teredo Tunneling Pseudo-Interface MTU = 1280
Display Name = Realtek PCIe GBE Family Controller MTU = 1500

Server 'fiosspeed3.west.verizon.net' is not behind a firewall. [Connection to the ephemeral port was successful]
Client is probably behind a firewall. [Connection to the ephemeral port failed]
Information: Network Middlebox is modifying MSS variable
Information: Network Middlebox is modifying Window scaling option
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says [xxx.xxx.xxx.xxx] but Client says [yyy.yyy.yyy.yyy]

Any ideas or should I just create ticket for Verizon?